Begode EX30 upgraded suspension linkage, with cross rod design, greatly improve the shock absorption effect, will not hit the bottom. Free fender and other accessories, you can install it when you receive it, we provide installation tutorial videos, we can send it worldwide
1.Description
-
Made of 304 stainless steel with 5mm thickness, it has very high strength and will not bend and deform
-
The surface of the bracket is sprayed with metal spraying technology, beautiful and durable
-
Hollow shape, the weight of the linkage is 640g
2.Suspension
-
Full use of suspension travel:
Initial eye-to-eye distance of shock absorber: 200mm
Initial eye-to-eye distance of wheel: 120mm
Final eye-to-eye distance of shock absorber: 148mm
Final eye-to-eye distance of wheel: 28mm
The shock absorber travel is 52mm
The wheel travel is 92mm
The travel ratio is 1.77 (92÷52)
-
Cross bar design, will not hit the bottom
3.Shock Absorber
-
Use a shock absorber with an eye-to-eye distance of 200mm
-
FASTACE BDA53RC/DNM RCP-2S/DNM AOY-36RC is recommended
-
Support spring shock absorber with gas tank or air pressure shock absorber with dual air chamber (not supported by original linkage)
We will give you nylon isolation column, if your shock absorber width is 14mm (most shock absorbers, such as DNM RCP-2S), please select the 14mm option; If your shock absorber width is 18mm (such as Fastace), select the 18mm option
-
14mm width shock absorber
-
18mm width shock absorber
-
Please use a spring above 450LBS and adjust it according to your weight (I weigh 70kg and feel good at 450LBS)
4.Fender
-
PP material cutting and bending, strong and durable
-
Fixed with the complimentary stainless steel screws, very strong
-
Surface frosted grain, beautiful and exquisite
-
Prevent rain and dust splash, extend the life of the shock absorber
-
M3 holes are reserved, and you can customize your own fender
5.What’s in the box:
14mm width shock absorber:
15mm isolation column *2
1mm gasket *4
0.5mm gasket *4
60mm stainless steel internal thread column *1
M8*10 stainless steel screws *2
M3*4 stainless steel screws *6
suspension linkage kit*1
fender*1
18mm width shock absorber:
12mm isolation column *2
20mm isolation column *2
1mm gasket *6
0.5mm gasket *4
60mm stainless steel internal thread column *1
M8*10 stainless steel screws *2
M3*4 stainless steel screws *6
suspension linkage kit*1
fender*1
Reviews
There are no reviews yet.